Unsanded St. Martins Teal Tile Grout - 15 lbs

Regular price $120.00

St. Martins Teal Unsanded Grout

Vibrant, Chromatic colors are possible when using grout from Grout360. Great for tile jobs or mosaics where more color options are desired. The material you will receive already has the color added and all you have to add is water. Custom color matching is available. We can custom match most paint swatch color cards from Sherwin Williams, Benjamin Moore, the Home Depot and Lowes. We also match to tiles, painted wood samples, fabric, Pantone Colors, etc.

Technical Info and Installation Instructions:


ANSI 118.7, designed to set in several hours versus 24 hours.
Contains mildew resistant additive
Polymer Fortified for harder curing grout
Contains High Density Fibers to improve crack resistance
Safe for use on Glass tiles


This is an Unsanded grout to be used in grout joints up to 1/8". Pre-sealing porous tile or stone with an appropriate brand sealer may be necessary to prevent grout staining of the porous material. The mix is easy to use, just add water. It is enhanced with Polymer to create Hard, Long-lasting, Professional results. Key attributes:

1. Can be used on walls.
2. Interior and Exterior applications.
3. Kitchens and Bathrooms.
4. Residential and Commercial jobs (not for floors that will be pressure-washed or exposed to harsh chemicals.
5. Makes a hard, dense grout.
6. Great for highly-glazed ceramic tile, polished marble, and glass tiles.
7. Will not scratch softer materials.
8. Since these colors are very strong, make sure to test softer or porous materials for potential staining.


Steps for mixing and installing the Unsanded grout.

Add appropriate amount of water to a clean mixing container.
Add the grout
Stir for 3-4 minutes
Let sit/slake for 5 minutes
Stir again for 1 minute
Apply grout with float 
Remove excess from surface
Wait 15-20 minutes for grout to stiffen up

!!Very Important!! Lightly clean off excess with clean, slightly damp sponge, sponge should not be dripping water. It’s very important not to wash away the top layer of grout, as the color will not be the same throughout the project. Using too much water will make the color appear washed out.

Wait 3-4 hours
Remove haze with soft towel, microfiber or cheesecloth
Do not walk on for 24 hours if applying to floor tiles, 72 hours if used in a shower
Wait 3 days and then seal with several coats of a high quality grout sealer


Color variations can occur in any white Portland cement product. Slight color differences are normal.